What are the decoration requirements for the level 100,000 dust-free clean room?

For the building enclosure and interior decoration of 100,000 class dust-free clean room, materials with good air tightness and small deformation under the effect of temperature and humidity change shall be selected. The surface of the wall and ceiling in the clean room of class 100,000 dust-free workshop shall be flat, smooth, crack free, tight interface and particle free.

 

The surface of the wall and ceiling in the class 100,000 dust-free clean room shall be flat, smooth, crack free, tight interface, no particles falling off, and shall be resistant to cleaning and acid and alkali. The joint of the wall, the ground and the ceiling shall be made into an arc, and the skirting shall not be higher than the wall. When the light material is used for melting, anti-collision measures shall be taken.

 

The ground of the level 100,000 dust-free clean room shall have good integrity, flatness, wear resistance, impact resistance, not easy to accumulate static electricity, easy to dust removal and cleaning, the ground cushion shall be reinforced, and damp-proof treatment shall be conducted in humid areas.

 

For the building enclosure and interior decoration of 100,000 class dust-free workshop, materials with good air tightness and small deformation under the effect of temperature and humidity change shall be selected.

 

When the technical mezzanine is light ceiling, the maintenance channel shall be set. The interior surface decoration standard of building air duct and return air trench shall be suitable for the whole air supply and return system and easy to remove dust.

According to the five decoration requirements listed above, when decorating the level 100,000 dust-free clean room workshop, you can refer to the above suggestions.